About Unotron LtdUnotron ProductsLatest News, Press Releases and AwardsPartner InformationWhere To BuyContact InformationSupport - FAQs, Drivers, Wash ProcessCareer Opportunities

   

Typical Wash and Sterilising Process For SpillSeal Keyboards and Mice


Best Practice Wash Procedure For Healthcare

  1. A washbasin would be filled with a anti-bacterial / cleaning solution suitable for sterilising.
  2. Sterilise by completely immersing and shaking it in the sterilising solution. Actively agitate it around so that the liquid reaches every recess on all surfaces.
  3. The process of agitated immersion should require no more than 30 seconds to be effective.
  4. Shake vigorously to drain excess liquid and wipe dry.
  5. You can also disinfect your keyboard using a hospital grade disinfectant spray. Spray the keyboard and wipe dry with a sterile wipe

Note! The Unotron SpillSeal keyboard is a hermetically seal unit and cal safely be used while still wet. The USB plug is also waterproof. If it gets wet just shake to remove the excess fluid. It can now be safely plugged back into your computer.

Important: Please observe the manufacturers instructions for the preparation and use of all cleaning fluids and wear the appropriate protective clothing.

   
   

© Copyright 2008 – UNOTRON LIMITED